• DStv Switch (5-1) User Guide. • Some of the information in this guide can get a little technical; as always, we recommend the use of a DStv Accredited Installer for all your installation needs. It’s easy to locate one in your area - just go to www.dstv.com. • Multiswitch outputs Troubleshooting Tip If the DStv Switch’s blue light is not on (indicating that it’s getting power), check that the outputs to the decoder(s) are: 1) Securely connected (both to the switch and decoder), and 2) That the decoder(s) themselves are switched on and getting power.

Install your own DSTV. Place the main dish antenna assembly onto the top of the mast, with the center of the mast clamp on the back dish assembly aligning withthe top of the mast pole. Tighten the two screws on the mast clamp to hold the main dish assembly securely to the mast. Plug the RG-6 coaxial cable into the “Cable” (or equivalent). ‘DStv no signal E48-32/ DStv no signal found’ If you receive this message it means no signal is being received by the DStv satellite dish. This could be due to bad weather or an installation problem.

• DStv Accredited Installer. You can find your nearest one at www.dstv.com IS20 is the satellite footprint used for DStv services in Southern Africa.

E36B is for East and West African countries. Mac os mojave. • Connecting the Inputs from your Satellite Dish Please Note • If you have a Unicable™ LNB, you can connect your LNB cable directly to the DStv Explora (there is no need to use this switch). • If you have a Unicable™ LNB with multiple decoders in your home, please contact your DStv Accredited Installer. • H/L and V/L inputs.

Any LNB cable can go to the any of the latter inputs. Quad LNB Optional to connect the second two quad LNB cables. DStv Switch (5-1) DStv Switch - User Guide. • Quad LNB Any LNB cable can connect to any of these 3 inputs DStv Switch (5-1) Quattro LNB Connection Use quattro Quattro LNB LNB output labels to match DStv Switch (5-1) input labels. DStv Switch (5-1) DStv Switch - User Guide. • Connecting the Switch to your Decoder(s) The DStv Switch (5-1) has two Explora outputs (labelled A and B) and four normal multiswitch outputs (labelled 1 to 4).

• The Explora outputs can only be connected to a DStv Explora, they aren’t designed to connect to other decoder models. • DStv Explora This installation requires a DStv Switch per DStv Explora. The DStv Switch (5-1) can only be connected to one DStv Explora at any one time.

• Once the first switch has been connected to the satellite dish, connect output A or B on the first switch to the input labelled UNICABLE™. • DStv Explora This installation requires a DStv Switch per DStv Explora.

Ribelle the brave canzoni italiano. During the Italian invasion of France, 9 French soldiers defended the Pont Saint Louis against 5000 Italians for 10 days. 21-25 Kickass and Brave Soldiers.

The DStv Switch (5-1) can only be connected to one DStv Explora at any one time. • Once the first switch has been connected to the satellite dish, connect output A or B on the first switch to the input labelled UNICABLE™. • DStv Explora This installation requires a DStv Switch per DStv Explora. The DStv Switch (5-1) can only be connected to one DStv Explora at any one time. • Once the first switch has been connected to the satellite dish, connect output A or B on the first switch to the input labelled UNICABLE™.

• Connecting the DStv Switch (5-1) to one DStv Explora and one to four Single View Decoders DStv Explora Use any Single View Decoder(s) one of the outputs. • Once the switch has been connected to the satellite dish, use the supplied cable and connect output A or B on the switch to the input labelled UNICABLE™. • Connecting the DStv Switch (5-1) to one DStv Explora and one 2 Tuner Decoder DStv Explora Decoder Models: 2P, 2U, SD PVR & Dual View Use a combination of 2 Tuner Decoder any two outputs. • Once the switch has been connected to the satellite dish, use the supplied cable and connect output A or B on the switch to the input labelled UNICABLE™.