May 11, 1999 - 5 Refer to Specification Section 15990Paragraph3 1 for field verificationand TAB work (I E clean. Tolephonp 1 (804) J67 8500. Saint Catherine of Siena Church - Great Falls, VA. (1 Mb RAM) with Revision 2 x English Firmware.

• Contents 1. Introduction 1.1 Overview 1.2 Main Features 2. Safety/Precautions 2.1 Safety 2.2 Precautions 3. Points to Check before Use 3.1 Accessories 4. Controls/Functions 4.1 Front Panel 4.2 Rear Panel 4.3 Remote Controller 5. How to Connect 6. Operation 6.1 Getting Started 6.2 System Setting 6.3 Channels 6.4 Electronic Program Guide.

• Introduction Safety/Precautions 1.1 Overview 2.1 Safety This satellite receiver is designed for the reception of free-to-air channels. Depending on your location, enjoy the rich choice of up to 10,000 different channels broadcasting a large range of programs: culture, sports, cinema, news, events, etc. This receiver is assembled Be sure to read this user's manual Do not touch the power cord with wet with highly qualified electronic parts. • 2.2 Precautions Points to Check before Use When installing the unit 3.1 Accessories Install the unit horizontally. An uneven Do not put heavy items such as a TV installation may cause the unit to be set on the unit. That may damage the The accessories below are included with this receiver: damaged.

• 4.2 Rear Panel Controls/Functions 4.1 Front Panel No. Name Connector Function LNB INPUT IEC 169-24 FEMALE IF input from LNB to digital tuner LOOP OUT IEC 169-24 FEMALE IF loop-through output from digital tuner AUDIO L RCA cinch Left audio output Standby/Power on Indications Lamp: Flashes red light in ‘Standby’.

• 4.3 Remote controller 4.3 Remote controller POWER: To turn the receiver On/Off. Left & Right: To change the volume level in non-menu mode and modify MUTE: To turn the sound On/Off. A setting in menu mode. Numeric Keys (0-9): To enter numerical OK: To show the Channel List in non- settings (such as channel numbers) menu mode and select an item or confirm. • How to Connect Operation 6.1 Getting Started Connect the TV antenna to TV ANT IN Connect the RF-IN of the TV to RF-OUT After your receiver is powered on, proceed with installation as follows: When available, you may instead connect the video and audio of the TV to video and audio: Connect the red and white connectors to Audio R and 1) Menu Language Setting Audio L, and the yellow connector to video. • 6.1 Getting Started 6.1 Getting Started ( When the DiSEqC Motor parameter is set as 1.2 ) 2) Antenna Setup - Hemisphere: Select between the Northern/Southern. Press the MENU button to display the main menu.

- Move: You can move the dish to the West/East. To move in the menu.

############################################################################### GnGeo has been installed. It's available at: - neogeo-bios: - neogeo-unibios: Please keep in mind that the NEOGEO BIOS is copyrighted software. Neo geo rom ng sfix romans. 1) You need to manually download neogeo-bios or neogeo-unibios.

• 6.1 Getting Started 6.1 Getting Started 3) Satellite Scan Manual Scan Chose Auto Scan to search using transponders (frequencies) in memory, or chose Blind Scan to Select a transponder. Look for new satellite/transponders. To change a transponder’s information (Frequency, Symbol Rate), use the NUMERIC Through this function, the receiver searches for all the available channels and saves them in buttons. • 6.1 Getting Started 6.1 Getting Started 4) Channel Selection You can use to navigate between channels until you find the channel you want. If you know the channel number, you can enter it with the NUMERIC buttons and wait 2 seconds until the channel is changed. • 6.1 Getting Started 6.1 Getting Started 5) Other Functions of the Remote Control Teletext (YELLOW) The Teletext service is a text data service sometimes available from the Service Provider. Volume Control While watching a program, press to control the volume.